========== About COOZ AUTO Performance ==========

Malaysia Registered Company

Shopee Preferred Seller

Ship out from Malaysia warehouse

All products are properly QC by Malaysian Team before sending out.

Search your car model in our store for others product u may like

Saved the shipping fee by combined order

Follow our shop get the VOUCHER

Shop online and get the BEST PRICE from COOZ AUTO Performance.

CUSTOMER SERVICE

Jangan Risau , Malaysian for Malaysia !

If you Receive any faulty / defects  / wrong item goods?

Please forgive us & CHAT with us.

Provided picture of product you received.

We will guide you for the parcel return & solution.

PRODUCTS DECRIPTIONS:

• Complete Plug & Play Socket Harness With No Wire Cut To Protect Manufacturer Warranty
• Good Quality
• Only For Inokom Lorimas AU26
• Oem Replacement TailLamp
• Left SAME Right / Right SAME Left
• 1Pcs Only
• If your want 1Pair Please Purchase Order 2Pcs

PRODUCT DETAILS:

INSTALLATION:

1. Remove factory tail lights assembly. The tail lights for most cars are simply bolted on from the inside of the trunk. You just need to remove the trunk carpet cover and un-bolts the tail lights. Slowly move the loosed tail lights a little by a little to have the tail lights removed completely. Do not hurry on this step, because you might break any clips that are used to hold the tail lights from inside.
2. Remove all the light bulbs from the factory tail light housing and disconnect any wiring harness connected to the tail light assembly as well. I will recommend you use the scotch blue tape to write down the turn signal lights, brake lights, backup lights and put on each set of wires so later when you put them back, you won't get confused.
3.  Take your LED tail lights out from the box and try to put the tail lights back up just to make sure this is the correct part/side before you put all the bulbs back in.
4. Connect the aftermarket LED tail lights with the factory wirings. For most LED tail lights, most of the sockets and plugs are already designed to be simply plug and play. However if there are any hard wiring required. Simply connect the stock red wire to the LED tail light red wire, and black wire to black.
5. Before have the LED tail light completely bolt-on back, test it first. Test the brake light, test the turn signal light and test the backup lights to make sure everything works. If unfortunately one of them does not work, inspect the connection, because this is the most common reason for a lamp not lighting up.
6. Place the LED tail lights back into the original tail lights locations. Use the blue tape to hold the tail lights if you are doing this by yourself or have your buddy hold it for you so you can bolt it back. Don't bolt the screw completely tighten in, because you want the tail light to completely back to the proper position, then tighten every screws.
    

NOTE️:

Please confirm the product matches your car model

Make sure your car fog lamp same as picture provided.

No Instructions Included.

Professional installation is highly recommended.

ABOUT SHIPPING

1️) Quick And Reliable.

2️) Direct Delivery From Local Warehouse

3️) We will send out parcel within 1-3 working days.

4️) We will contact Customer if product OUT of stock

PAY ATTENTION️:

We sellers have NO CONTROL on logistic parties delivery operation.

How fast your parcel will send out is heavily depend on courier

We DO NOT take any RESPONSIBILITY of any item that broke by courier service